01.Higher pairs are those which have
Point or line contact between the two elements when in motion.
02.A universal joint is an example of
03.A simple mechanism has
4 links.
04.The lower pair is a
sliding pair.
05.In higher pair, the relative motion is
Combination of sliding and turning.
06.Davis steering gear consists of
sliding pairs.
07.The motion transmitted between the teeth of gears in mesh is
Partly sliding and partly rolling.
08. Oldham's coupling is the
Third inversion of double slider crank chain.
09.Elements of pairs held together mechanically is known as
closed pair.
10.Rectangular bar in a rectangular hole is the following type of pair
completely constrained motion.
11.The tendency of a body to resist change from rest or motion is known as
inertia.
12.In a gear drive, module is equal to
1/diameter pitch.
13.If the opposite links of a four bar linkage are equal, the links will always form a
parallelogram.
14.Whit Worth quick return mechanism is contained by inversion of
15.Which of the following is a lower pair?
ball and socket&
piston and cylinder.
16.The lead screw of a lathe with nut is a
screw pair.
17.Kinematic pairs are those which have two elements that
permit relative motion.
18.Oldham's coupling is used to connect two shafts which are
19.Degree of freedom of super structure is
less than zero.
20.Degree of freedom of structure is
0(zero).
21.Which one of the following is a higher pair ?
22. Oldham's coupling is the inversion of
double slider crank mechanism.
23.A point on a connecting link of a double slider crank mechanism traces a
elliptical path.
24.Coriolis component of acceleration is always
perpendicular to link.
25.The cam follower used in aircraft engines is a
roller follower.
No comments:
Post a Comment